Model Number: WDH050
Brand Name: Bozhong Metal
Key Specifications/Special Features:
IntroductionAlloy 59 is a nickel-chromium-molybdenum alloy with high mechanical strength and excellent corrosion resistance. The alloy also possesses high resistance to stress corrosion cracking, chloride pitting and oxidizing and reducing media.The following datasheet will provide more details about alloy 59.Chemical CompositionThe following table shows the chemical composition of alloy 59.Element content (%)Nickel, Ni56 - 63Chromium, Cr22 - 24Molybdenum, Mo15 - 16.5Iron, Fe≤1.5Manganese, Mn≤0.5
Cobalt, Co≤0.3
Aluminum, Al0.1-0.4
Silicon, Si≤0.1
Phosphorous, P≤0.015
Carbon, C≤0.01
Sulfur, S≤0.005
Physical Properties
The physical properties of alloy 59 are outlined in the following table.
Properties metric imperial
Density 8.6 g/cm0.311 lb/in
Mechanical properties
The mechanical properties of alloy 59 are outlined in the following table.
Properties metric imperial
Tensile strength (@sheet and strip 0.5 to 6.4mm) 690 MPa100000 psi
Yield strength (@rod, bar, forgings > 100mm) 320 MPa46400 psi
Modulus of elasticity210GPa30500 ksi
Elongation at break 40% 40%
Thermal properties
The thermal properties of alloy 59 are given in the following table.
Properties metric imperial
Thermal expansion coefficient (@20-100°C/68-212°F) 11.9 m/m°C, 6.61 in/in°F
Thermal conductivity 10.4 W/mK72.2 BTU in/hr.ft.°F
Applications
The following are some of the major applications of alloy 59:
Cobalt, Co≤0.3
Aluminum, Al0.1-0.4
Silicon, Si≤0.1
Phosphorous, P≤0.015
Carbon, C≤0.01
Sulfur, S≤0.005
Physical Properties
The physical properties of alloy 59 are outlined in the following table.
Properties metric imperial
Density 8.6 g/cm0.311 lb/in
Mechanical properties
The mechanical properties of alloy 59 are outlined in the following table.
Properties metric imperial
Tensile strength (@sheet and strip 0.5 to 6.4mm) 690 MPa100000 psi
Yield strength (@rod, bar, forgings > 100mm) 320 MPa46400 psi
Modulus of elasticity210GPa30500 ksi
Elongation at break 40% 40%
Thermal properties
The thermal properties of alloy 59 are given in the following table.
Properties metric imperial
Thermal expansion coefficient (@20-100°C/68-212°F) 11.9 m/m°C, 6.61 in/in°F
Thermal conductivity 10.4 W/mK72.2 BTU in/hr.ft.°F
Applications
The following are some of the major applications of alloy 59:
- Flue gas scrubber components
- Pulp and paper industry
- Sulfuric acid coolers
- Seawater equipment
- Waste incinerators
ORM | Specification | Supply form | Others |
Sheet | Thickness: 0.40-4.75mm General width: 1000, 1219, 1500mm |
whole coil or piece of it | cold annealed, surface 2B, 2E |
Plate | Thickness: 4.76-60mm Width: 1500, 2000, 2500mm Length: 3000, 6000, 8000, 8500mm (under 10mm plate can be coiled) |
whole coil or piece of it | single hot rolling, solid solution annealed state, surface 1D |
Belt | Thickness: 0.10-3.0mm Width: 50-500mm |
whole coil or specified size | cold annealed, surface 2B, 2E |
Bar and rod | Rolled bar: Φ5-45mm Length: ≤1500mm |
polished bar (circle, square) | solutionannealing, decaling |
Forged bar: Φ26-245mm Length: ≤4000mm | |||
Weld tube | Outer diameter: Φ4.76-135mm Wall thickness: 0.25-4.00mm Length: ≤35000 mm |
base on your requirement | use for PHE |
Seamless tube | Outer diameter: Φ3-114mm Wall thickness: 0.2-4.5mm |
base on your requirement | use for PHE |
Wire | Outer diameter: Φ0.1-13mm | base on your requirement | Ni and Ni alloy, Ti and Ti alloy |
Forged piece | roundness and square alloy | base on your requirement | steel, alloy |
Flanges | all kinds of flanges | base on your requirement | steel, alloy |
Welding materials | Coil wire: Φ0.90/1.2/1.6mm | base on your requirement | Certificate of origin: America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight wire: Φ1.2/1.6/2.4/3.2/4.0mm | |||
Welding rod: Φ2.4/3.2/4.0mm | |||
Tube | elbow, three links, four links, different diameter size | base on your requirement | Ni and Ni alloy, Ti and Ti alloy |
Explosive bonded laminate | Raw sheet thickness: ≥2mm | base on your requirement | Ni and Ni alloy, Ti and Ti alloy |
Shipping Information:
- FOB Port: China (Mainland)
- Lead Time: 3 - 30 days
- Dimensions per Unit: 5.8 × 2 × 1.65 Meters
- Weight per Unit: 25000 Kilograms
- Units per Export Carton: 25000
- Export Carton Dimensions L/W/H: 5.89 × 2.35 × 2.39 Meters
- Export Carton Weight: 25 Metric Tonnes
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe